LWGY Series turbine flowmeter is to draw a new generation of turbine meter flow meter at home and abroad advanced technology and optimized design, has a simple structure, lightweight, high precision, reproducibility is good, responsive, easy to use features to install and maintain, and is widely used the measurement in closed conduits and stainless steel 1Cr18Ni9Ti, 2Cr13 and corundum AI2O3, carbide corrode, and no fibers, particles and other impurities, kinematic viscosity at operating temperature is less than 5 × 10-6m2 / s of liquid, for kinematic viscosity greater than After 5 × 10-6m2 / s of liquid, solid to liquid flow meter calibration using. If the display instrument with special features, can also be quantitative control, excessive alarm, etc., is an ideal flow metering and energy meter . □ highly accurate, generally up to ± 1% R, ± 0.5% R, high-precision up to ± 0.2% R; □ repeatability, short-term repeatability of up to 0.05% to 0.2%, it is due to good repeatability, such as frequent calibration or on-line calibration available to high accuracy, in trade settlement is the preferred flow meter;? □ output pulse frequency signal, suitable for the measurement of total and connected to your computer, no zero drift, interference ability; □ get very high frequency signals (3 ~ 4kHz), signal resolution and strong; □ wide range of degrees, medium and large caliber up to 1:20, small caliber 1:10; □ Compact and lightweight structure, easy installation and maintenance, flow capacity; □ apply high voltage measurement, the meter body does not have to cut, easy to type instrument made of high pressure; □ special type of sensor types, can be designed for all kinds of special-type sensor according to the special needs, such as low temperature type, bi-directional, underground type, sand and other special type; □ Insertion can be made suitable for large diameter measurement, pressure loss, low price, do not remove the drying, easy installation and maintenance.